In this post, I will explore some development patterns that I’ve seen (and done!) with Chef cookbooks, and then explain how we can evolve to a new level of cookbook development. The examples here come from Chef’s new chef-splunk cookbook, which is a refactored version of an old splunk42 cookbook. While there is a public splunk cookbook on the Chef community site, it shares some of the issues that I saw with our old one, which are partially subject matter of this post.
Anyway, on to the evolution!
These are the general patterns I’m going to address.
role:some-server”Cookbook development is a wide and varied topic, so there are many other patterns to consider, but these are the ones most relevant to the refactored cookbook.
It may seem like a good idea, to compose URL strings as attributes or local variables in a recipe based on other attributes and local variables. For example, in our splunk42 cookbook we have this:
[ruby]splunk_root = "http://download.splunk.com/releases/"
splunk_version = "4.2.1"
splunk_build = "98164"
splunk_file = "splunkforwarder-#{splunk_version}-#{splunk_build}-linux-2.6-amd64.deb"
os = node[‘os’].gsub(/\d*/, ”)
[/ruby]
These get used in the following remote_file resource:
[ruby]remote_file "/opt/#{splunk_file}" do
source "#{splunk_root}/#{splunk_version}/universalforwarder/#{os}/#{splunk_file}"
action :create_if_missing
end
[/ruby]
We reused the filename variable, and composed the URL to the file to download. Then to upgrade, we can simply modify the splunk_version and splunk_build, as Splunk uses a consistent naming theme for their package URLs (thanks, Splunk!). The filename itself is built from a case statement (more on that in the next section). We could further make the version and build attributes, so users can update to newer versions by simply changing the attribute.
So what is bad about this? Two things.
splunk42::client recipe, and repeated again in the splunk42::server recipe with only minor differences (the package name, splunk vs splunkforwarder).How can this be improved? First, we can set attributes for the full URL. The actual code for that is below, but suffice to say, it will look like this (note the version is different because the new cookbook installs a new Splunk version).
[ruby]default[‘splunk’][‘forwarder’][‘url’] = ‘http://download.splunk.com/releases/6.0.1/universalforwarder/linux/splunkforwarder-6.0.1-189883-linux-2.6-amd64.deb’
[/ruby]
Second, we have helper libraries distributed with the cookbook that break up the URI so we can return just the package filename.
[ruby]def splunk_file(uri)
require ‘pathname’
require ‘uri’
Pathname.new(URI.parse(uri).path).basename.to_s
end
[/ruby]
The previous remote_file resource is rewritten like this:
[ruby]remote_file "/opt/#{splunk_file(node[‘splunk’][‘forwarder’][‘url’])}" do
source node[‘splunk’][‘forwarder’][‘url’]
action :create_if_missing
end
[/ruby]
As a bonus, the helper methods are available in other places like other cookbooks and recipes, rather than the local scope of local variables.
One of the wonderful things about Chef is that simple Ruby conditionals can be used in recipes to selectively set values for resource attributes, define resources that should be used, and other decisions. One of the horrible things about Chef is that simple Ruby conditionals can be used in recipes and often end up being far more complicated than originally intended, especially when handling multiple platforms and versions.
In the earlier example, we had a splunk_file local variable set in a recipe. I mentioned it was built from a case statement, which looks like this, in full:
[ruby]splunk_file = case node[‘platform_family’]
when "rhel"
if node[‘kernel’][‘machine’] == "x86_64"
splunk_file = "splunkforwarder-#{splunk_version}-#{splunk_build}-linux-2.6-x86_64.rpm"
else
splunk_file = "splunkforwarder-#{splunk_version}-#{splunk_build}.i386.rpm"
end
when "debian"
if node[‘kernel’][‘machine’] == "x86_64"
splunk_file = "splunkforwarder-#{splunk_version}-#{splunk_build}-linux-2.6-amd64.deb"
else
splunk_file = "splunkforwarder-#{splunk_version}-#{splunk_build}-linux-2.6-intel.deb"
end
when "omnios"
splunk_file = "splunkforwarder-#{splunk_version}-#{splunk_build}-solaris-10-intel.pkg.Z"
end
[/ruby]
Splunk itself supports many platforms, and not all of them are covered by this conditional, so it’s easy to imagine how this can get further out of control and make the recipe even harder to follow. Also consider that this is just the client portion for the splunkforwarder package, this same block is repeated in the server recipe, for the splunk package.
So why is this bad? There are three reasons.
What is a better approach? Use the full URL as I mentioned before, and set it as an attribute. We will still have the gnarly case statement, but it will be tucked away in the attributes/default.rbfile, and hidden from anyone reading the recipe (which is the thing they probably care most about reading).
[ruby]case node[‘platform_family’]
when ‘rhel’
if node[‘kernel’][‘machine’] == ‘x86_64’
default[‘splunk’][‘forwarder’][‘url’] = ‘http://download.splunk.com/releases/6.0.1/universalforwarder/linux/splunkforwarder-6.0.1-189883-linux-2.6-x86_64.rpm’
default[‘splunk’][‘server’][‘url’] = ‘http://download.splunk.com/releases/6.0.1/splunk/linux/splunk-6.0.1-189883-linux-2.6-x86_64.rpm’
else
default[‘splunk’][‘forwarder’][‘url’] = ‘http://download.splunk.com/releases/6.0.1/universalforwarder/linux/splunkforwarder-6.0.1-189883.i386.rpm’
default[‘splunk’][‘server’][‘url’] = ‘http://download.splunk.com/releases/6.0.1/splunk/linux/splunk-6.0.1-189883.i386.rpm’
end
when ‘debian’
# …
[/ruby]
The the complete case block can be viewed in the repository. Also, since this is an attribute, consumers of this cookbook can set the URL to whatever they want, including a local HTTP server.
Another example of gnarly conditional logic looks like this, also from the splunk42::clientrecipe.
[ruby]case node[‘platform_family’]
when "rhel"
rpm_package "/opt/#{splunk_file}" do
source "/opt/#{splunk_file}"
end
when "debian"
dpkg_package "/opt/#{splunk_file}" do
source "/opt/#{splunk_file}"
end
when "omnios"
# tl;dr, this was more lines than you want to read, and
# will be covered in the next section.
end
[/ruby]
Why is this bad? After all, we’re selecting the proper package resource to install from a local file on disk. The main issue is the conditional creates different resources that can’t be looked up in the resource collection. Our recipe doesn’t do this, but perhaps a wrapper cookbook would. The consumer wrapping the cookbook has to duplicate this logic in their own. Instead, it is better to select the provider for a single package resource.
[ruby]package "/opt/#{splunk_file(node[‘splunk’][‘forwarder’][‘url’])}" do
case node[‘platform_family’]
when ‘rhel’
provider Chef::Provider::Package::Rpm
when ‘debian’
provider Chef::Provider::Package::Dpkg
when ‘omnios’
provider Chef::Provider::Package::Solaris
end
end
[/ruby]
Definitions are simply defined as recipe “macros.” They are not actually Chef Resources themselves, they just look like them, and contain their own Chef resources. This has some disadvantages, such as lack of metaparameters (like action), which has lead people to prefer using the “Lightweight Resource/Provider” (LWRP) DSL instead. In fact, some feel that definitions are bad, and that one should feel bad for using them. I argue that they have their place. One advantage is their relative simplicity.
In our splunk42 cookbook, the client and server recipes duplicate a lot of logic. As mentioned a lot of this is case statements for the Splunk package file. They also repeat the same logic for choosing the provider to install the package. I snipped the content from the when "omnios" block, but it looks like this:
[ruby]cache_dir = Chef::Config[:file_cache_path]
splunk_pkg = splunk_file.gsub(/\.Z/, ”)
execute "uncompress /opt/#{splunk_file}" do
not_if { ::File.exists?(splunk_cmd) }
end
cookbook_file "#{cache_dir}/splunk-nocheck" do
source "splunk-nocheck"
end
file "#{cache_dir}/splunkforwarder-response" do
content "BASEDIR=/opt"
end
pkgopts = ["-a #{cache_dir}/splunk-nocheck",
"-r #{cache_dir}/splunkforwarder-response"]
package "splunkforwarder" do
source "/opt/#{splunk_pkg}"
options pkgopts.join(‘ ‘)
provider Chef::Provider::Package::Solaris
end
[/ruby]
(Note: the logic for setting the provider is required since we’re not using the default over-the-network package providers, and installing from a local file on the system.)
This isn’t too bad on its own, but needs to be repeated again in the server recipe if one wanted to run a Splunk server on OmniOS. The actual differences between the client and server package installation are the package name, splunkforwarder vs splunk. The earlier URL attribute example established a forwarder and server attribute. Using a definition, named splunk_installer, allows us to simplify the package installation used by the client and server recipes to look like this:
[ruby]splunk_installer ‘splunkforwarder’ do
url node[‘splunk’][‘forwarder’][‘url’]
end
splunk_installer ‘splunk’ do
url node[‘splunk’][‘server’][‘url’]
end
[/ruby]
How is this better than an LWRP? Simply that there was less ceremony in creating it. There is less cognitive load for a cookbook developer to worry about. Definitions by their very nature of containing resources are already idempotent and convergent with no additional effort. They also automatically support why-run mode, whereas in an LWRP that must be done by the developer. Finally, between resources in the definition and the rest of the Chef run, notifications may be sent.
Contrast this to an LWRP, we need resources and providers directories, and the attributes of the resource need to be defined in the resource. Then the action methods need to be written in the provider. If we’re using inline resources (which we are) we need to declare those so any notifications work. Finally, we should ensure that why-run works properly.
The actual definition is ~40 lines, and can be viewed in the cookbook repository. I don’t have a comparable LWRP for this, but suffice to say that it would be longer and more complicated than the definition.
Search is one of the killer features of running a Chef Server. Dynamically configuring load balancer configuration, or finding the master database server is simple with a search. Because we often think about the functionality a service provides based on the role it serves, we end up doing searches that look like this:
[ruby]splunk_servers = search(:node, "role:splunk-server")
[/ruby]
Then we do something with splunk_servers, like send it to a template. What if someone doesn’t like the role name? Then we have to do something like this:
[ruby]splunk_servers = search(:node, "role:#{node[‘splunk’][‘server_role’]}")
[/ruby]
Then consumers of the cookbook can use whatever server role name they want, and just update the attribute for it. But, the internet has said that roles are bad, so we shouldn’t use them (even though they aren’t ;)). So instead, we need something like one of these queries:
[ruby]splunk_servers = search(:node, "recipes:splunk42\:\:server")
#or
splunk_servers = search(:node, "#{node[‘splunk’][‘server_search_query’]}")
[/ruby]
The problem with the first is similar to the problem with the first (role:splunk-server), we need knowledge about the run list in order to search properly. The problem with the second is that we now have to worry about constructing a query properly as a string that gets interpolated correctly.
How can we improve this? I think it is more “Chef-like” to use an attribute on the server’s node object itself that informs queries the intention that the node is in fact a Splunk server. In our chef-splunk cookbook, we use node['splunk']['is_server']. The query looks like this:
[ruby]splunk_servers = search(:node, "splunk_is_server:true")
[/ruby]
This reads clearly, and the is_server attribute can be set in one of 15 places (for good or bad, but that’s a different post).
In the past, it was deemed okay to repeat resources across recipes when those recipes were not included on the same node. For example, client and server recipes that have similar resource requirements, but may pass in separate data. Another example is in the haproxy) cookbook I wrote where one recipe statically manages the configuration files, and the other uses a Chef search to populate the configuration.
As I have mentioned above, a lot of code was duplicated between the client and server recipes for our splunk42 cookbook: user and group, the case statements, package resources, execute statements (that haven’t been shared here), and the service resource. It is definitely important to ensure that all the resources needed to converge a recipe are defined, particularly when using notifications. That is why sometimes a recipe will have a service resource with no actions like this:
[ruby]service ‘mything’
[/ruby]
However Chef 11will generate a warning about cloned resources when they are repeated in the same Chef run.
Why is this bad? Well, CHEF-3694 explains in more detail that particular issue, of cloned resources. The other reason is that it makes recipes harder to reuse when they have a larger scope than absolutely necessary. How can we make this better? A solution to this is to write small, composable recipes that contain resources that may be optional for certain use cases. For example, we can put the service resource in a recipe and include that:
[ruby]service ‘splunk’ do
supports :status => true, :restart => true
provider Chef::Provider::Service::Init
action :start
end
[/ruby]
Then when we need to make sure we have the service resource available (e.g., for notifications):
[ruby]template "#{splunk_dir}/etc/system/local/outputs.conf" do
source ‘outputs.conf.erb’
mode 0644
variables :splunk_servers => splunk_servers
notifies :restart, ‘service[splunk]’
end
include_recipe ‘chef-splunk::service’
[/ruby]
Note that the service is included after the resource that notifies it. This is a feature of the notification system, where the notified resource can appear anywhere in the resource collection, and brings up another excellent practice, which is to declare service resources after other resources which affect their configuration. This prevents a race condition where, if a bad config is deployed, the service would attempt to start, fail, and cause the Chef run to exit before the config file could correct the problem.
Making recipes composable in this way means that users can pick and choose the ones they want. Our chef-splunk cookbook has a prescriptive default recipe, but the client and server recipes mainly include the others they need. If someone doesn’t share our opinion on this for their use case, they can pick and choose the ones they want. Perhaps they have the splunk user and group created on systems through some other means. They won’t need the chef-splunk::user recipe, and can write their own wrapper to handle that. Overall this is good, though it does mean there are multiple places where a user must look to follow a recipe.
Managing secrets is one of the hardest problems to solve in system administration and configuration management. In Chef, it is very easy to simply set attributes, or use data bag items for authentication credentials. Our old splunk42 cookbook had this:
[ruby]splunk_password = node[:splunk][:auth].split(‘:’)[1]
[/ruby]
Where node[:splunk][:auth] was set in a role with the username:password. This isn’t particularly bad since our Chef server runs on a private network and is secured with HTTPS and RSA keys, but a defense in depth security posture has more controls in place for secrets.
How can this be improved? At Chef, we started using Chef Vault to manage secrets. I wrote a post about chef-vault a few months ago, so I won’t dig too deep into the details here. The current chef-splunk cookbook loads the authentication information like this:
[ruby]splunk_auth_info = chef_vault_item(:vault, "splunk_#{node.chef_environment}")[‘auth’]
user, pw = splunk_auth_info.split(‘:’)
execute "#{splunk_cmd} edit user #{user} -password ‘#{pw}’ -role admin -auth admin:changeme" do
not_if { ::File.exists?("#{splunk_dir}/etc/.setup_#{user}_password") }
end
file "#{splunk_dir}/etc/.setup_#{user}_password" do
content ‘true\n’
owner ‘root’
group ‘root’
mode 00600
end
[/ruby]
The first line loads the authentication information from the encrypted-with-chef-vault data bag item. Then we make a couple of convenient local variables, and change the password from Splunk’s built-in default. Then, we control convergence of the execute by writing a file that indicates that the password has been set.
The advantage of this over attributes or data bag items is that the content is encrypted. The advantage over regular encrypted data bags is that we don’t need to distribute the secret key out to every system, we can update the list of nodes that have access with a knife command.
Neither Chef (the company), nor I are here to tell anyone how to write cookbooks. One of the benefits of Chef (the product) is its flexibility, allowing users to write blocks of Ruby code in recipes that quickly solve an immediate problem. That’s how we got to where we were with splunk42, and we certainly have other cookbooks that can be refactored similarly. When it comes to sharing cookbooks with the community, well-factored, easy to follow, understand, and use code is preferred.
Many of the ideas here came from community members like Miah Johnson, Noah Kantrowitz, Jamie Winsor, and Mike Fiedler. I owe them thanks for challenging me over the years on a lot of the older patterns that I held onto. Together we can build better automation through cookbooks, and a strong collaborative community. I hope this information is helpful to those goals.